Surface Restoration

Surface Restoration

When deterioration is beyond removal by conventional sanding and buffing without risk to the substrate or its detail, the surface needs to be restored. This is accomplished by applying a substantial soft copper plating followed by a re-sanding. If required remaining pitting, scratches, holes, or low areas are then silver soldered. The solder then is "cut down" level with the copper surface and then the item is re-copper plated enabling the entire surface including the area previously soldered to be polished. Depending upon inspection the part will either have the copper plate reapplied and reworked or sent for final triple plate.

Click here to tour the surface restoration process.

Return to the Paul's Chrome Home Page

This web site developed by ComputerMagic